Consumer Unit Replacement Cost: What Affects the Price of a New Fuse Box
Last updated 21 November 2026
The cost of replacing a consumer unit, or fuse box, depends mainly on the number of circuits, whether you choose RCDs or individual RCBOs, surge protection, the condition of the earthing and bonding, and any faults found when the new board is tested. Replacement is notifiable under Part P in England and should come with an Electrical Installation Certificate. We give free quotations.
Replacing an old fuse box with a modern consumer unit is one of the most common electrical upgrades in UK homes, and one of the most worthwhile for safety. The price is not the same for every home, because it depends on the board you choose, the condition of the circuits it supplies and what the electrician finds when testing. This guide explains what affects the cost of a consumer unit replacement, what should be included and how to compare quotations. It covers homes in England.
What a consumer unit replacement involves
The consumer unit is the board that distributes electricity to every circuit in your home and protects those circuits. Replacing it involves isolating the supply, removing the old board, fitting the new one, connecting each circuit and then testing. Because the whole installation depends on the board, the electrician has to test all of the circuits connected to it, not just the board itself. Our consumer unit upgrade guide explains why modern boards are safer and when replacement makes sense.
What affects the cost
The number of circuits
Each circuit has to be connected, labelled and tested. A small flat with a few circuits is a quicker job than a large house with separate circuits for a shower, cooker, immersion heater, garage and garden.
The type of protection
Modern consumer units can protect circuits in different ways. A board that uses RCDs to protect groups of circuits generally costs less than one where every circuit has its own RCBO, but RCBOs mean a fault on one circuit does not switch off others. Some circuits may also benefit from arc fault detection devices. Our guide to RCDs, RCBOs and AFDDs explains the differences. Surge protection is also required in many installations under BS 7671.
Earthing and bonding
Before a new board is fitted, the earthing arrangement and the main protective bonding to gas and water pipes should be checked. If bonding is missing or undersized, it needs putting right, which adds to the job.
Faults found during testing
Old fuse boards often hide problems, because rewireable fuses and older circuit breakers do not detect earth leakage. When an RCD protected board is fitted, a circuit with a fault may trip it straight away. The electrician then has to find and fix the fault before the circuit can be put back into use. This is one of the main reasons a final price can differ from the original quotation, so ask how faults found during the work will be handled and priced.
Position and access
If the board needs to move to a more suitable position, or if the meter tails need replacing, this adds work. Where the electricity network operator needs to attend, for example to isolate the supply, that may also affect timing.
What should be included
A complete quotation for a consumer unit replacement should include:
- the new consumer unit and its protective devices;
- connecting, labelling and testing every circuit;
- checking the earthing and main protective bonding;
- an Electrical Installation Certificate with the test results;
- notification of the work under Part P, and a Building Regulations compliance certificate.
Replacing a consumer unit is notifiable work under Part P in England, so it should be carried out by a registered electrician who can self-certify it. Our Part P and electrical certificates guide explains the paperwork.
Planning for the day
Replacing a consumer unit means the power to the whole property is off for much of the work. Plan for this by charging phones and laptops and keeping fridges and freezers closed. If anyone in the home relies on powered medical equipment, tell the electrician when you book, and ask roughly how long the power will be off so that you can plan around it. For a business, the work can be planned for a time that suits your operations.
Labelling and the circuit chart
Every circuit on the new board should be clearly labelled, so that you know which device controls which part of the home. A circuit chart is usually fixed inside or next to the board. This makes it easier to isolate a circuit in an emergency and helps any electrician who works on the installation later.
When a replacement makes sense
A replacement is often recommended when an older board lacks RCD protection, is damaged or shows signs of overheating, or cannot take a new circuit, for example for an EV charger or electric shower. An EICR gives a clear picture of the board and the circuits and can tell you whether replacement is advisable. If the wiring itself is in poor condition, a new board alone may not be enough; see our rewire cost guide.
How to compare quotations
When comparing prices, check:
- whether the board uses RCDs, RCBOs or a mixture, and whether surge protection is included;
- whether testing every circuit and checking the bonding are included;
- how faults found during the work will be handled;
- that certification and Part P notification are included.
The cheapest quotation may be for a simpler board, or may leave out work that another quotation includes, so compare the specification as well as the total.
Get a quotation
We do not publish set prices for consumer unit replacements, because every installation is different. See our domestic electrical services, call 01253 364101 or send us a message for a free quotation.
Frequently asked questions
How much does a consumer unit replacement cost?
There is no single price. It depends on the number of circuits, the type of protection, surge protection, the condition of the earthing and bonding and any faults found during testing. We give free quotations for your property.
Is a fuse box the same as a consumer unit?
Yes. Fuse box is the everyday name for the consumer unit. Older boards often use rewireable fuses, while modern consumer units use circuit breakers with RCD or RCBO protection.
Should I choose RCBOs or RCDs?
Both provide protection against electric shock. RCBOs protect each circuit individually, so a fault switches off only that circuit, while RCDs protect groups of circuits. Our RCD, RCBO and AFDD guide explains the choice.
Why might the price change once the work starts?
A new RCD protected board can reveal faults that an old fuse box did not detect. These need finding and fixing before the circuit can be used, and should be discussed with you before any extra work is done.
Can I replace a consumer unit myself?
No. Replacing a consumer unit is notifiable work involving the whole installation, so it should be carried out, tested and certified by a competent, registered electrician.
Sources
- GOV.UK, Approved Document P: electrical safety (dwellings)https://www.gov.uk/government/publications/electrical-safety-approved-document-p
- Planning Portal, Electricshttps://www.planningportal.co.uk/permission/common-projects/electrics
- Electrical Safety Firsthttps://www.electricalsafetyfirst.org.uk/
